Our Second Century of Quality Products

 

 
 

 


Our Founder
Rasmus Rasmussen

Quality Products
Since 1907
 

[Find A Dealer]

[100 Year Recognitions]

[
As Seen On TV ]

[
In the News]

[9/11/2001 -
Never Forget
]


 

 

 

 


Chillbuster logo
"EASY" Safety Control System

All Chillbster Vent-Free/Reduced Vent Hearth Kits utilize a standing ODS pilot, which is lighted manually by pushing in the valve knob while depressing the piezo spark igniter.

Battery power from the receiver operates the ON/OFF functions of the "SE" and RE" systems.  The safety function is powered by a thermocouple ODS pilot, which is
not dependent on the inconsistencies of thermopiles.  Changing batteries is much easier than replacing a thermopile.

 All EASY Control options use the same valve body. This means that "ME" models may be upgraded to either "SE" or "RE" functionality with the addition of either the SE-UP1 or RE-UP1 upgrade kits.  If you desire, you can purchase a manual control now and upgrade to remote functionality at a later date.  Conversion can be down in place (no need to send the unit back to the factory), as each EASY valve is safety seal equipped, which prevents leakage of gas when upgrading.  Conversion is easy for anyone who can read instructions.

Should a solenoid or motor drive fail, the valve can be operated as a manual control (once the solenoid or motor drive is removed) until a replacement part is obtained.  No down time!

--------------------------------------------------------------------------------
1) Manual ("ME")
 
Turn the valve knob to light the burner and to control the flame height.
        

----------------------------------------------------------------------------------------------------------------------------
2) Variable Flame Height Remote Control ("RE")
  Motor drive system that controls the ON/OFF and flame height with the hand-held remote transmitter (included).
        

----------------------------------------------------------------------------------------------------------------------------
3) Remote Ready ON/OFF Remote Control ("SE")
  Latching solenoid system that controls the ON/OFF of the burner(s) with one of five
Wireless Remote Transmitter Devices (sold separately but necessary to operate the system - see below). "SE" is not a "millivolt" system.
       


Transmitter Device Options - Sold separately, but needed to operate system.



SR-2R  Simple ON/OFF
Hand-Held Remote


THR-2R  ON/OFF with
Thermostat Hand-Held Remote


TS-2R  Wireless
Wall Thermostat

WS-2R  Wireless
Wall Switch



WT-2R  Wireless
Wall Timer
30-60-90 minutes

RH3  Smooth-Sided
Ceramic Log House
to protect SE and RE
Receivers from heat

-----------------------------------------------------------------------------------------------------------------------------

   
   

 


 
 

Home | About Us | Products | Fabrication Services | Store | Contact

Copyright 2011 Rasmussen Iron Works, Inc.    All Rights Reserved


 
 
Click on a photo for information

Product Navigation
Vented Gas Log Sets
Vent-Free Gas Log Sets
CoalFire  Sets

ALTERNA Vented Alternative Sets
ALTERNA Vent-Free Alternative Sets
FirePit Logs

Solaire Infrared Grills
Solaire Anywhere

Radiant Patio Heaters

Dealer Search

Register Your Solaire

Help/Resource Navigation
Troubleshooting and Knowledge Base (FAQs)
Blog/Newsletter Archive

Logs Instructions
Log Set Sizing
Solaire Instructions
Solaire Built-in Dimensions

Brochures
Photos/Video Repository
Photos - Logs
Photos - ALTERNA
Photos- Solaire






Rasmussen Fabrication Services features laser cutting and quality craftsmanship for parts and product manufacturing contracts.